Multiple Unit Stop Command; Multiple Unit Find Command - Scanivalve MPS4232 Hardware And Software Manual

MPS4232
FUNCTION BYTES
Packet Type 2

Multiple Unit Stop Command

Multiple MPS units are stopped scanning by connecting
to one MPS and issuing a MSTOP command. This device
becomes the master and reissues a multicast STOP
command. See the table below for the stop packet format.
All devices that are set up to listen to this multicast address
will respond to the STOP command.
Table 3-2: MSTOP Packet Format
FUNCTION BYTES
Packet Type 2

Multiple Unit Find Command

The user may connect to one MPS4200 and issue a MFIND
command. This command will return a list of all devices
that are part of the multicast cluster. The MFIND command
uses the Discovery Packet described below.
Table 3-3: MFIND Packet Format
FUNCTION BYTES
Packet Type 2
DATA
DESCRIPTION
TYPE
Integer 0202
DATA
DESCRIPTION
TYPE
Integer 0303
DATA
DESCRIPTION
TYPE
Integer 0101
21
Section 3: Operation