Inserting And Removing Connecting Cable Plug; Switching The Blower On/Off - Stihl BGA 200 Instruction Manual

7 Inserting and Removing Connecting Cable Plug

► Push battery (4) as far as it will go into the belt
bag (5).
A short beep will sound.
► Secure battery (4) with the Velcro® fasten‐
ing (6).
6.7.2 Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted
to suit the user's size and the application.
3
The length of the connecting cable can be adjus‐
ted by making a loop (1) and securing it to the
belt bag (3) with the fastener (2).
► Arrange the connecting cable so that it is as
short as possible without hindering your work.
7 Inserting and Removing
Connecting Cable Plug
7.1 Inserting the Connecting Cable
Plug
1
► Hold connecting cable plug (2) so that the
arrow on its side lines up with the arrow on the
socket (1).
► Insert the connecting cable plug (2) in the
socket (1).
The plug (2) engages in position.
0458-812-0121-B
2
1
2
7.2 Removing the Connecting
Cable Plug
1
► Grip the connecting cable plug (2) with your
hand.
► Pull the plug (2) out of the socket (1).
8 Switching the Blower
On/Off
8.1 Switching On the Blower
► Hold the blower firmly with your right hand on
the control handle – wrap your thumb around
the handle.
3
► Press the trigger lockout (1) with your hand
and keep it pressed.
► Push release slide (2) in direction of arrow
with your thumb and allow it to spring back.
The LEDs illuminate to indicate the power
level at last use.
► Press the trigger (3) with your index finger and
keep depressed.
The blower accelerates and air flows out of the
nozzle.
The further the trigger switch (3) is depressed,
the more air flows out of the nozzle.
The blower can also be switched on by first
pressing the release slide (2) and pressing the
trigger lockout (1) within 5 seconds (as long as
the LEDs are flashing). The trigger (3) is now
unlocked and the blower is ready for use.
The LEDs continue flashing for 5 seconds after
the trigger (3) and trigger lockout (1) are
released after switch-on. As long as the LEDs
are flashing, the blower can be switched on
English
2
2
1
11