Inserting And Removing The Battery; Inserting The Battery - Stihl BGA 300.0 Instruction Manual

14 Inserting and Removing the Battery

To determine the battery's state of charge:
► Press the button (1) on the backpack battery.
A single short beep will be emitted. The LEDs on the battery
will glow or flash green for about 5 seconds and indicate the
state of charge (see illustration).
For example:
If six green LEDs glow continuously: full charge.
If one green LED is flashing and four long beeps are emitted:
less than 20 % charge.
14 Inserting and Removing the Battery

14.1 Inserting the Battery

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 7.
WARNING
To reduce the risk of unintended activation, never store the
battery in the blower, @ 6.1.
0458-724-8201-A
100 % 0 %
To insert the battery:
1
► Position the battery (1) on the backplate (2) so that the
guides on the backplate engage the recesses in the
battery.
4
1
► Open the lever (5) and hold it there.
► Press the battery (1) against the backplate (2) until the
plug (3) connects to the socket (4).
English
2
3
5
2
19