Fitting The Cim 060 Into A Ciu 902 Box; Fitting The Cim 060 Into A Cu 362 - Grundfos CIM 060 Installation And Operating Instructions Manual

4.1 Fitting the CIM 060 into a CIU 902 box

• Click the CIM 060 on the top right corner of the
CIU box. See fig. Position of the CIM 060 in a CIU
902
CIU 902
Position of the CIM 060 in a CIU 902
If the product is to be connected to a GSM network,
connect the CIU 902 to a CIU 250 unit via GENIbus.
See fig. CIM 060 in a CIU 902 connected to a GSM
network.
CIU 250
CIM
250
GENlbus
CIM 060 in a CIU 902 connected to a GSM network
Do not fit the CIM 250 in the CIU 902.
Caution

4.2 Fitting the CIM 060 into a CU 362

• Remove the back cover of the CU 362.
• Click the CIM 060 on top of the main board, in the
back of the CU 362. See fig. Fitting the CIM 060 in
the CU 362.
• Fit the screw in the bottom mounting hole.
• Use cutting pliers to cut out the back cover of the
CU 362, around the external antenna connector.
See fig. CIM 060, pos. 6.
6
CIM
060
CIU 902
CIM0
60
See also section installation and operating
instructions of the CU 362.
Fitting the CIM 060 in the CU 362
If the product is to be connected to a GSM network,
connect the CU 362 to a CIU 250 unit in this way:
• Install a CIM 040 in the CIU 250 box next to the
CIM 250.
• Connect the CIM 040 to the TTL service port of
CU 362 via the TTL cable provided with the CIM
040. See fig. CIM 060 in a CU 362 connected to a
GSM network.
CIU 250
CIM
CIM
040
250
CIM 060 in a CU 362 connected to a GSM network
Pos. Description
1 TTL cable
Related information
3.2 Product overview
CU 362
CIM
060
1