Titan T9200 User Manual page 44

Wrong hose or hood
electrical connections.
Vacuum cleaner Tripped overload
starts but shuts protector in the motorized
off. nozzle.
Tripped thermal protector
in canister.
Nozzle connections
unplugged.
Worn or broken belt.
Motorized Dirty agitator or end caps.
nozzle will
not run when
Tripped overload
attached.
protector in the motorized
nozzle.
Switch not in CARPET
position.
Full or clogged dust bag.
Dirty filters.
CHECK BAG
Indicator
Blocked airflow passage.
activates.
When using certain
attachment tools.
Check connections; reconnect hose ends
(page 10).
Turn off the vacuum cleaner and remove any
items that may be caught or jammed, then
restart the vacuum cleaner. If the vacuum
cleaner starts and stops again, clean the
agitator and end caps, then reset (page 24).
See THERMAL PROTECTOR (page 24).
Plug in firmly.
See BELT CHANGING AND AGITATOR
CLEANING (page 37-41).
See BELT CHANGING AND AGITATOR
CLEANING (page 37-41).
Turn off the vacuum cleaner and remove any
items that may be caught or jammed, then
restart the vacuum cleaner. If the vacuum
cleaner starts and stops again, clean the
agitator and end caps, then reset (page 24).
Move the switch to CARPET position (page
14).
Change bag. (page 27-28)
Clean/replace filters. (page 29-30)
Clear blockage from airflow passage. (page
26)
This is normal. Light should go off when tool
is removed.
-44-