Titan T9200 User Manual page 30

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter installed. Do
not operate without filter cover installed.
1. Pull out and down on the exhaust filter cover to remove from the canister and lay aside.
2. Pull the exhaust filter up and out from the rear of the canister.
3. Replace the exhaust filter cartridge. Place the new filter into the canister with the foam
seal facing towards the canister.
4. Replace the exhaust filter cover by placing the two tabs on the filter cover into the slots
on the canister and rotate into place until it snaps closed.
Exhaust
Filter
-30-