Titan T9200 User Manual page 10

HOOD AND TOOL STORAGE COVER
It is normal for the canister hood and tool storage cover to come off when opened further
than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood
and tool storage cover to reinstall.
CAUTION
Never open canister hood with the tool storage cover open. This will help to prevent
damage from occurring to the canister hood and/or tool storage cover.
HOSE
Align the hose latch tab and the notch in canister hood and insert the hose into canister
until it snaps into place.
To remove: Press the hose latch tab inward and pull out on the hose.
Hose
Latch Tab
Notch
-10-