netvox R718J User Manual page 8

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Sleeping(MinTime)
th
0H 15 M
Wakes up and
Wakes up and
collects data
collects data
REPORT 3.6V 3.6V
Does not report
Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Wakes up and collects data
3.5V |3.5-3.6|=0.1
REPORTS 3.5V
sleeping sleeping
0H 15 th M 30 th
Wakes up Wakes up and
and collects collects data
data 3.6V Does not
REPORTS report
3.6V
Notes:
(1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not
collect data.
(2) The data collected is compared with the last data reported. If the data change value is greater than the ReportableChange
value, the device reports according to MinTime interval.
If the data variation is not greater than the last data reported, the device reports according to
MaxTime interval.
(3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low, the device wakes up
frequently and the battery will be drained soon.
(4) Whenever the device sends a report, no matter resulting from data variation, button pushed or MaxTime interval, another
cycle of MinTime/MaxTime calculation is started.
MaxTime
sleeping sleeping
th
30 M
Wakes up and Wakes up and
collects data collects data
3.6V
Does not report Does not report
Users push the button,
REPORTS 3.5V.
Recalculate MaxTime.
M 45 th M 1H 1H 10
Wakes up and Wakes up and
collects data collects data
3.5V Does not 3.5V Does not
report report
sleeping
th
45 M 1H
Wakes up and
collects data
3.6V REPORT 3.6V
MaxTime
Wakes up and
collects data 3.5V
Does not report
th M 1H 25 th M 1H 40 th M 1 1H 55
Wakes up and
collects data
3.5V Does not
report
7
2H
Wakes up
and collects
data
REPORTS
3.5V
th M
Wakes up and
collects data
3.5V Does not
report