How To Use Advanced Functions - MrCool Easy Pro RG10A User Manual

How to Use Advanced Functions

Swing function
Press the SWING button
Swing
The horizontal louver will swing up and down
automatically when pressing SWING button.
Press it again to make it stop.
Silence function
2s
Pressing the FAN button for more than 2 seconds will activate or disable the Silence
function (some units).
Due to low frequency operation of compressor, this function could result in
insufficient cooling and heating capacity. Pressing the ON/OFF, MODE, SLEEP, TURBO
or CLEAN button while the system is operating with the silence function activated will
cancel it.
LED Display
LED
Press LED button
Press the LED button to either turn on or off
the display on the indoor unit.
Page 17
How To Use Advanced Functions
mrcool.com
2s
Swing
Keep pressing the SWING button more than 2
seconds, this will activate the vertical louver
swing function (Model dependent).
5s
LED
Press and hold the LED button
more than 5 seconds
(some units).
Press and hold the LED button more than 5
seconds, to make the display of the indoor unit
show the actual room temperature. Press and
hold the LED button for more than 5 seconds
again and the display will revert back to the set
temperature.