Remote Screen Indicators
Information that is displayed when the remote controller is turned on.
Transmission:
This indicator lights up
when the remote
transmits a signal to the
indoor unit.
TIMER ON display
TIMER OFF display
Silence:
This indicator lights
up when the Silence
function is activated.
FAN SPEED:
Displays selected fan speed:
Silence
LOW
MED
HIGH
AUTO
NOTE: The fan speed cannot be
adjusted in AUTO or DRY mode.
*
Not all the models can display
the fan speed values between
AU-100%.
NOTE: All indicators shown are for demonstration purposes. During actual operation, only
the relative and active functions will be shown in the display window.
Page 5
Remote Screen Indicators
*
1%
*
2%-20%
*
21%-40%
*
41%-60%
*
61%-80%
*
81%-100%
mrcool.com
Breeze Away display (some units)
Active clean feature display
Sleep mode display
Follow me feature display
Wireless control feature display(some units)
Low battery detection display (If flashes)
Horizontal louver
swing display
Vertical louver
auto swing display
TURBO MODE display
Not available for
this unit.
MODE display
Displays the current mode,
including:
ECO display
Displays when ECO feature
is activated
GEAR display
Displays when GEAR feature
is activated
LOCK display
Displays when LOCK feature
is activated
Temperature/Timer/Fan
speed display
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
• Temperature range:
60-86°F (16-30°C)/
68°F-82°F (20-28°C)
(model dependent)
• Timer setting range:
0-24 hours
• Fan speed setting range:
AU - 100%
This display is blank when
operating in FAN mode.