Easy Pro™ Remote Controller; Buttons & Functions - MrCool Easy Pro RG10A User Manual

Easy Pro™ Remote Controller
Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions section of this manual.
ON/OFF
Turns the unit on or off.
TEMP
Increases temperature in
1°F (1°C) increments.
Maximum Temperature
setting is 86°F (30°C).
NOTE: Press together
buttons at the same
time for 3 seconds will
alternate the temperature
display between °C & °F.
Scrolls through operation
functions in following
sequence:
Sleep ( ) Follow Me ( )

AP Mode ( )
The selected symbol will
flash on the display window,
press the OK button to
confirm.
TEMP
Decreases temperature
in 1°F (1°C) increments
Minimum temperature
setting is 60°F (16°C).
FAN SPEED
Selects fan speeds in the
following sequence:
AU 20% 40%
  
80% 100%

Press the TEMP or
button to increase or
decrease the fan speed in
1% increments.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Operation Of Buttons
&
SET

60%
SWING
mrcool.com
MODE
Scrolls through operation modes in
the following sequence:
AUTO COOL DRY HEAT FAN
 

NOTE: HEAT mode is not supported
by the cooling-only version.
ECO/GEAR
Press this button to enter the energy
efficient modes which can be selected
in the following sequence:
ECO GEAR (75%)
Previous setting mode
OK
Used to confirm the selected
functions.
TIMER
Used to set the timer to turn the unit
on or off at a specified time.
BREEZE AWAY
This feature keeps direct airflow
from blowing directly on the
occupants of the room.
NOTE: This feature is only available
in COOL, FAN, and DRY modes.
CLEAN
Used to start/stop the Self-Clean or
Active Clean function (Model
dependent, please refer to the
USER'S OPERATION & INSTALLATION
MANUAL).
LED
Turns the indoor unit's LED display
and air conditioner buzzer on and off
(model dependent), to create a quiet
environment.
TURBO
Enables unit to reach the preset
temperature in the shortest possible
time.
3

GEAR (50%)
ECO
Page 4