Page 1
Remote Control User Manual Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual. Version Date: 04-27-21...
Remote Controller Specifications ..............2 Operation Of Buttons .................... 3 Indicators On LCD ....................6 How To Use The Buttons ..................7 Auto Operation ......................7 Cooling/Heating/Fan operation ................7 Dehumidifying operation ..................8 Timer operation ......................8 Handling The Remote Controller ..............12 Page 1 mrcool.com...
Installation Summary Remote Control Specifications Model R 57A6/BGEFU1 Rated Voltage 3.0V (Dry Batteries R03/LR03 x 2) Signal Receiving 26.25 ft. (8m) Range Remote Temperature 62°F - 86°F (16°C - 30°C) Setting Range ON/OF F S ILE NCE TIME R MODE...
SELF-CLEAN Button Activates or Disables the SELF-CLEAN function. Under SELF-CLEAN mode, the air conditioner will automatically clean and dry the evaporator and keep it fresh for the next operation. Page 3 mrcool.com...
Page 5
Each press will increase the auto-timed setting in 30 minute increments. When the time setting displays 10.0, each press will increase the auto-timed setting by 60 minute increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0. mrcool.com Page 4...
Page 6
LED Button TUR BO S E LF LE D F OLLOW C LE AN This button is used to disable/enable indoor screen display. When pressed, the indoor screen display is cleared. Press it again to light the display. Page 5 mrcool.com...
NOTE All indicators shown in the illustrations are for explanatory purposes. During the actual operation, only the symbols and numbers relative to the temperature and mode the unit is operating will be shown in the display window. mrcool.com Page 6...
2 seconds, the signal "H" will disappear, and the set temperature will reappear on the LCD display window. S WING DIR E C T S LE E P TUR BO S E LF LE D F OLLOW C LE AN mrcool.com Page 8...
Page 10
Press the TIMER ON button to display "6.0H " on the TIMER ON display of the remote control. Wait 3 seconds and the digital display area will show the temperature again. The "TIMER ON" indicator remains on and this function is activated. Page 9 mrcool.com...
Page 11
Press the TIMER ON button again to display 10H on the TIMER ON display . Wait 3 seconds and the digital display area will show the temperature again. The "TIMER ON & TIMER OFF" indicators remains on and this function is activated. mrcool.com Page 10...
Page 12
Press the TIMER OFF button again to display 5.0H on the TIMER OFF display . Wait 3 seconds and the digital display area will show the temperature again. The "TIMER ON & TIMER OFF" indicators remains on and this function is activated. Page 11 mrcool.com...
• This remote control emits infrared (IR) signals to control your air conditioner via the IR receiver located in the indoor unit. Be aware that other devices that emit an IR signal or contain an IR receiver may cause interference. If this occurs, take immediate corrective action and contact MRCOOL. DO NOT allow any liquid to enter the remote control.
Page 14
Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual. Version Date: 04-27-21...