How To Use Basic Functions - MrCool Easy Pro RG10A User Manual

How to Use Basic Functions

ATTENTION
Please ensure the unit is plugged in and power is available before operation.
1
3
COOL Mode
To select COOL Mode follow these steps:
1. Press the MODE button and select COOL
mode.
2. Set your desired temperature using the
TEMPERATURE
3. Press the FAN button to select the desired fan
speed: AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
How To Use Basic Functions
2
or buttons.
mrcool.com
SETTING TEMPERATURE
The operating temperature range for units is
62-86°F (17-30°C) or 68-82°F (20-28°C)
(model dependent). You can increase or
decrease the set temperature in 1°F (1°C)
increments by using the the Temperature
or buttons on the remote.
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operating mode based
on the set temperature. To select AUTO mode
follow these steps:
1. Press the MODE button and select AUTO
mode.
2. Set your desired temperature using the
TEMPERATURE
or
3. Press the ON/OFF button to start the unit.
NOTE: FAN speed cannot be set or adjusted
in AUTO mode.
1
4
3
buttons.
2
Page 14