Download Print this page
MrCool DIY Series User Manual
Hide thumbs Also See for DIY Series:

Advertisement

Advertisement

loading

Summary of Contents for MrCool DIY Series

  • Page 2 When there are wide differences between Remote controller Illustration USER'S MANUAL on function description, the description of USER'S MANUAL shall prevail. For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 3 Under SELF CLEAN mode, the air To cancel the auto-timed program, simply conditioner will automatically clean and dry adjust the auto-on time to 0.0. the Evaporator and keep it as fresh for the next operation. For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 4 Note: All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display window. For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 5 In this case, only step 1, 3 and 4 may be performed. SWING DIRECT SLEEP TURBO SELF FOLLOW CLEAN For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 6 Then, after approximately another 2 seconds, the signal "H " will disappear and the set temperature will re-appear on the LCD display window. For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 7 TIMER ON display . 5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated. For more details visit www.MrCool.com For more details visit www.MrCool.com...
  • Page 8 Before installing the remote controller, check that the air conditioner receives the signals properly. Install the remote controller with two screws. For installing or removing the remote controller, move it up or down in the holder. For more details visit www.MrCool.com For more details visit www.MrCool.com...