Setting The Timer - MrCool Easy Pro RG10A User Manual

Setting the TIMER

TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER ON setting
Press TIMER button to
initiate the ON time
sequence.
TIMER
TIMER OFF setting
Press TIMER button to
initiate the OFF time
sequence.
TIMER
NOTE:
• When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes
increments with each press, up to 10 hours. After 10 hours and up to 24, it will
increase in 1 hour increments. (For example, press 5 times to get 2.5h, and press
10 times to get 5h,) The timer will revert to 0.0 after 24.
• Cancel either function by setting its timer to 0.0h.
TIMER ON & OFF setting (example)
NOTE: Keep in mind that the time periods you set for both functions refer to hours after
the current time.
xn
TIMER
Timer
starts
Current
2 PM
time 1 PM
2.5 hours later
Setting the Timer
Press Temperature UP or DOWN
button to set the desired time to
turn ON the unit.
x5
Press Temperature UP or DOWN
button to set the desired time to
turn OFF the unit.
x10
Unit turns
ON
4 PM
3 PM 3:30 PM
5 hours later
mrcool.com
Point remote control at the unit
and wait 1 second, the
TIMER ON will be activated.
Point remote control at the unit
and wait 1 sec, the
TIMER OFF will be activated.
xn xn
TIMER
Unit turns
OFF
Example: If current time is 1:00PM,
and the timer is set using the above
steps, the unit will turn on 2.5 hours
later (3:30PM) and then turn off
5 PM
6 PM
at 6:00PM (5 hours after the timer
is originally set).
1
sec
1
sec
Page 16