How To Use Advanced Functions - MrCool Easy Pro RG10A User Manual

How to Use Advanced Functions

Swing function
Press the SWING button
Swing
The horizontal louver will swing up and down
automatically when pressing SWING button.
Press it again to make it stop.
Airflow direction
Swing
NOTE: When the unit is off, press and hold the MODE and SWING buttons together for one
second, the louver will move to an extreme angle to make it easier to clean. Press and hold
the MODE and SWING buttons together again for one second to reset the louver to its original
position (Model dependent).
LED Display
LED
Press LED button
Press the LED button to either turn on or off
the display on the indoor unit.
How To Use Advanced Functions
mrcool.com
2s
Swing
Keep pressing the SWING button more than 2
seconds, this will activate the vertical louver
swing function (Model dependent).
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be moved to a different angle each
time you press the button. Continue
the button until the desired setting is reached.
5s
LED
Press and hold the LED button
more than 5 seconds (some units).
Press and hold the LED button more than 5
seconds, to make the display of the indoor unit
show the actual room temperature. Press and
hold the LED button for more than 5 seconds
again and the display will revert back to the set
temperature.
pressing
Page 8