Page 1
AHU Remote Control User Manual Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual. Version Date: 02-21-22...
AHU Remote Controller ..............4 Buttons & Functions ......4 Remote Screen Indicators ....5 How to Use Basic Functions ..... 6 Setting the Timer ........8 How to Use Advanced Functions ..9 AHU Remote Controller Model #: RG10F2(D2)/BGEFU1 Page 1 mrcool.com...
When there are differences between the “Remote Controller Manual” and the “USER’S • MANUAL” when it comes to function description, the description of “USER’S MANUAL” should take precedence. mrcool.com Page 2...
• Curtains, other materials, and direct sunlight void user’s authority to operate the can interfere with the infrared signal receiver. equipment. Remove batteries if the remote will not be used more than 2 months. Page 3 mrcool.com...
However, these buttons may be used to activate other features. Please refer to the How to Use Basic Functions and How to Use Advanced Functions sections of this manual for more information. mrcool.com Page 4...
Not available for This display is blank when this unit operating in FAN mode. NOTE: All indicators shown are for demonstration purposes. During actual operation, only the relative and active functions will be shown in the display window. Page 5 mrcool.com...
1. Press the MODE button and select COOL mode. 2. Set your desired temperature using the TEMPERATURE buttons. 3. Press the FAN button to select the desired fan speed: AUTO, LOW, MED, or HIGH. 4. Press the ON/OFF button to start the unit. mrcool.com Page 6...
Page 8
4. Press the ON/OFF button to start the unit. NOTE: As the outdoor temperature drops, the performance of the unit’s HEAT function may be affected. If this occurs, we recommend using other heating appliances in conjunction with the unit. Page 7 mrcool.com...
(3:30PM) and then turn off Current 3:30 PM 4 PM 5 PM 6 PM 2 PM 3 PM time 1 PM at 6:00PM (5 hours after the timer 2.5 hours later is originally set). 5 hours later mrcool.com Page 8...
(The same temperature settings are not needed to stay comfortable while sleeping.) This function can only be activated by the remote control. For further details on the SLEEP function please refer to the User’s Manual. NOTE: The SLEEP function is not available in FAN or DRY mode. Page 9 mrcool.com...
Page 11
The wired thermostat must be used to remote control (instead of from the indoor activate this feature if so equipped. unit itself) will enable the air conditioner to optimize the temperature where you currently are and ensure maximum comfort. mrcool.com Page 10...
Page 12
Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual. Version Date: 12-22-21...