Upgrading The Card Firmware - Powerware BD User Manual

Upgrading the Card Firmware

During the upgrade process, the ConnectUPS Web/SNMP Card
is inaccessible, but restarts automatically within a minute after
completing the upgrade.
To upgrade the ConnectUPS-X or ConnectUPS-BD firmware,
use the following steps:
1. Locate a networked PC with Microsoft Windows
95/98/Me/NT/2000/XP.
2. Copy the supplied Firmware Upgrade Utility
(upgrade100.exe) program to the PC.
3. Run the Upgrade Utility from Microsoft Windows by
selecting
filename upgrade100.exe.
4. Assuming that the network (TCP/IP) connection for
the PC can reach the card needing the firmware
upgrade, select
attempt to find all reachable 10/100 ConnectUPS
Web/SNMP Cards on the network. Any cards that are
found are displayed in the table.
Discover
a card that is reachable, but not on the subnet, click
the
Add
5. Activate the checkbox by the ConnectUPS Web/SNMP
Card(s) to be upgraded (up to four cards at a time
under most network conditions).
ConnectUPS Web/SNMP Card (X and BD Models) User's Guide
, , and then entering the path and
Start Run
which instructs the utility to
Discover
searches only the current subnet. To upgrade
button and provide the requested information.
:
Rev A www.powerware.com
Appendix
33