Local Configuration
Set the IP Address, Gateway Address and MIB System
Group
Use this function (option
address, or the management information base (MIB)
parameters of the card, as listed in Table 2.
Table 2. Parameters with Examples
No.
Function
Description
1
IP Address
IP address of the card
2
Gateway
Default IP address of the network gateway
Address
3
Network Mask
Subnet mask setting
4
sysContact
System contact string of MIB (up to 127
characters)
5
sysName
System name parameter for MIB (up to 127
characters)
6
sysLocation
System location parameter for MIB (up to
127 characters)
Set Web/SNMP Card Control Group
For those users who intend to use BOOTP/DHCP, Telnet, or
secure HTTP in order to configure, control, update, or manage
the card, certain control parameters must be enabled or
disabled. Use this function to modify those parameters
(option
).
2
NOTE To prevent unauthorized viewing of the Web pages presented by
the ConnectUPS Web/SNMP Card, use this function to enable HTTP
Security Control.
NOTE To obtain an IP address using BOOTP/DHCP (instead of serial
configuration), set DIP Switch 2 on the front panel to the ON position (OFF
is the default).
14
ConnectUPS
Web/SNMP Card (X and BD Models) User's Guide
) to set the IP address, the gateway
1
Example
192.72.173.188
192.72.173.254
255.255.255.0
Powerware
ConnectUPS Web/SNMP
Card
TEST LAB
:
Rev A www.powerware.com