Table of Contents
Advertisement
6. Then select
Set Values
events repeat until you change the table or select
Disable UPS Shutdown Schedule
NOTE Before scheduling any shutdowns or startups, you must configure
the date and time within the ConnectUPS Web/SNMP Card.
Configuring E-mail Notification
You may use the ConnectUPS Web/SNMP Card to inform
selected e-mail accounts of events and changes in status as
they occur in the UPS or to provide a daily status message at a
predetermined time.
1. Select
home page, then
2. Become a Superuser and then enter the IP address or
Hostname of an SMTP mail server that will be used to
send the e-mail messages.
3. If you entered a host name for the
must enter the IP address of your network DNS Server
in the
4. To receive a daily status report, enter the time of day
to send the e-mail (in 24-hour format).
5. Enter the
Level
Account must be a valid e-mail address. Refer to the
online help file for more details on each of these
fields.
6. Select
7. Test your settings by pressing the
The ConnectUPS Web/SNMP Card uses the Identification
Information field data and the card's IP address to create the
sender's e-mail address (default example:
UPS.Web.Card@192.168.7.18).
You can change the Identification Information field to a more
recognizable sender user name by accessing the Identification
ConnectUPS
Web/SNMP Card (X and BD Models) User's Guide
Enable UPS Shutdown Schedule
to start the process. Any shutdown/restart
.
from the menu at the top of the
Configuration
Email Notification
block.
DNS Address
,
Mail Account
Description
, and
for each recipient. The Mail
Event Type
to save your changes.
Set Values
Rev A www.powerware.com
UPS Power Management
, followed by
.
, you
Mail Server
,
,
Mail Type
Event
button.
Send Test
25
Advertisement
Table of Contents
