Configuring The Card - Powerware BD User Manual

Configuring the Card

To configure the card:
1. Type
(see Figure 6).
+===================================================================
| [ ConnectUPS Web/SNMP Card Configuration Utility ]
+===================================================================
1. Web/SNMP Card Settings
2. Reset Configuration to default
3. Restart Web/SNMP Card
4. UPS Pass-Through
0. Exit
Please Enter Your Choice =>1
+===================================================================
| [ ConnectUPS Web/SNMP Card Configuration Utility ]
+===================================================================
1. Set the IP Address, Gateway Address and MIB System Group
2. Set Web/SNMP Card Control Group
3. Set Write Access Managers
4. Set Trap Receivers
5. Set IP Addresses of Primary and Secondary Date Server
6. UPS Event Actions
7. Set UPS Information
8. Set Superuser Name and Password
9. Email Notification
10. Set Website Links
0. Back to Main Menu
Please Enter Your Choice =>_
Figure 6. Web/SNMP Card Settings Screen
2. Type
Address and MIB System Group menu. Enter the
appropriate settings for your network (see page 14).
ConnectUPS Web/SNMP Card (X and BD Models) User's Guide
to enter the Web/SNMP Card Settings screen
1
to enter the Set the IP Address, Gateway
1
:
Rev A www.powerware.com
Local Configuration
11