E-Wheels EW-46 Service & Repair Manual page 38

original seat latch release lock cylinder. Reinstall the main body shroud and hook the new cable to the
seat latch.
Security Alarm System – The alarm system plugs
directly into the controller via two connectors.
When replacing, separate the original alarm system
connectors, dismount, and install the replacement
using the same controller connectors. There is a
8mm nut and Philips
Seat Latch and Seat Latch
Cable Replacement
Seat Latch Cable – To replace the seat
latch cable, the seat and storage box,
and main body shroud must be
removed. Once removed, dismount the
original seat latch cable from the seat
latch release lock cylinder, and install the
replacement seat latch cable into the
38