E-Wheels EW-46 Service & Repair Manual page 32

Current Model - The batteries are now wired in a
positive to negative series. There is one wire harness
wire that connects the first batteries positive. From
there, the batteries are wired with two-sided terminal
wires that connect battery number one's remaining
positive, to battery number two's negative. This
sequence is continued until there is only battery
number four's positive terminal available without a wire
connected. Finish the battery wiring by connecting the
remaining wire that is connected to one of the sides of
the circuit breaker, to batter number four's remaining
positive terminal. Refer to the photo below for a visual
reference.
Back Shocks - removing the storage box underneath the seat will be necessary. Replace the shocks
separately to avoid frame to frame contact. The top, and bottom bolt for the rear shocks is going to be a
socket and wrench. (14mm)
32