E-Wheels EW-46 Service & Repair Manual page 25

Front Wheel Fender's
On each front fender there is going
to be a total of 3 bolts that use a
10mm socket and rachet or a 10mm
wrench. Once they are removed the
plastic-colored fender will come off.
Main Body Shroud
To remove the main body shroud, power to the machine must be turned off via the circuit breaker, and
the seat and storage box underneath the seat need to be dismounted or unplugged. Make sure these
things are done before proceeding.
There is a total of twelve securing bolts, three wire harness connections, and one latch cable that will
need to be removed or unplugged before the main body shroud can be lifted off the scooter.
*Make Sure Circuit Breaker Is OFF First*
There is a total of (x4) philips screws that connect the storage box to
the frame of the machine. The 2 wires that go to the circuit breaker
will also need to be removed before the storage box can come out of
the unit.
25