E-Wheels EW-46 Service & Repair Manual page 20

the nut side. Avoid overtightening or the seat will not be able to be lifted easily.
The headset bolt is a
either side to be able
13mm. Turn the handlebars to
to gain access to the nut side.
There are two transaxles to swing arm bolts on each
side of the scooter. The bolt size is going to be . Make
sure the bolts are tight on each side. If there is a gap
between the axle bracket and the swing arm, this is
normal. If overtightened bolts from the transaxle to
swing arms can potentially snap.
There are five bolts on each side axle that securing the
axle housing to the differential/motor assembly. Make
sure all bolts are tightened with the same amount of
pressure to avoid potential oil leaks with a 5mm.
20