ADC HiGain H2TU-C-388 List 7F Manual page 35

LTPH-UM-1214-02
Select Master Clear to clear the History, Alarm and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the start-up session and ensures that you
have meaningful data thereafter.
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1 Press P to select the Performance screen.
2 Press SPACEBAR
H2TU-R HDSL2), then press
3 Press ↓ to select statistics.
4 Press the SPACEBAR
48-Hour History, or 31-Day History), and press
–
Selecting 31-Day History allows you to clear the current, 25-hour, 48-hour, and 31-day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 Alarm screens, see
page 40, respectively.
5 Press L to clear the screen.
Y
6 Press to confirm.
To clear ALL history, alarm, and event log screens by this method:
1 Press C to select the Config screen.
2 Use the ↑ and
3 Press
ENTER
4 Press Y to clear all screens.
H2TU-C-388 List 7F
E to select the Event Log screen, then press
to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
ENTER .
to select the type of statistics (Current, Alarm History, 25-Hour History,
↓ arrow keys to select Master Clear.
to activate.
July 21, 2003
L to clear the screen.
ENTER after your selection.
Table 15 on page 39
Provisioning
and Table 16 on
25