Installation - ADC HiGain H2TU-C-388 List 7F Manual
Hide thumbs
Also See for HiGain H2TU-C-388 List 7F:
- Technical practice (76 pages) ,
- User manual (76 pages) ,
- Quick installation (7 pages)
Table of Contents
Advertisement
LTPH-UM-1214-02
I
NSTALLATION
H2TU-C
Upon receipt of the equipment, inspect the contents for signs of damage. If the equipment has
been damaged in transit, immediately report the extent of damage to the transportation
company and to ADC.
When installing an H2TU-C in a chassis, be sure to wear an antistatic wrist strap. Avoid touching
components on the circuit board.
To comply with the intrabuilding wiring requirements of GR-1089 CORE, Section 4.5.9, the
shields of the ABAM-type cables that connect the H2TU-C DSX-1 output ports to the
cross-connect panel must be grounded at both ends.
1
Align the H2TU-C with the shelf card-slot guides and slide the unit in.
2
Push on the H2TU-C front panel to secure the unit in the shelf.
H2TU-C-388 List 7F
Figure 2. Installing the H2TU-C into a Shelf
July 21, 2003
H0202-B
CO Shelf
Installation
7
Advertisement
Table of Contents
Need help?
Do you have a question about the HiGain H2TU-C-388 List 7F and is the answer not in the manual?
Questions and answers