ADC HiGain H2TU-C-388 List 7F Manual page 15

LTPH-UM-1214-02
Message Full Name
PWR FEED GND Power Feed Ground
PWR FEED OPEN Power Feed Open
PWR FEED SHRT Power Feed Short
PRMF Performance Report Messaging -
Far End
PRMN Performance Report Messaging -
Near End
RAIS Remote Alarm Indication Signal
RLOS Remote (Unit) Loss of Signal
RRAI Remote RAI—Remote Alarm
Indication at the H2TU-R (Net
signal has errors.)
LOF Loss of Frame
TRCI Transmit RAI-CI—TX RAI-CI
Indication - Customer Installation
at the H2TU-R (Net signal does not
have errors.)
SPNn Span Number
TUC Transmission Unit Central Office
TUR Transmission Unit Remote End
H2TU-C-388 List 7F
Table 2. Front-Panel Display Messages (Continued)
Description
The HDSL2 loop is grounded.
Indicates a line power open condition.
Indicates a short between the Tip and Ring of the HDSL2 pair.
H2TU-R PRM-FE BER threshold has been exceeded.
H2TU-R PRM-NE BER threshold has been exceeded.
Indicates an AIS (unframed all ones) pattern is being received or
transmitted at the H2TU-R DS1 input or output ports.
Indicates that no signal is detected at the DS1 input to the H2TU-R.
Causes a system alarm.
Indicates an RAI alarm (yellow) from the CPE with errors from the line
unit or network.
The DS1 input does not contain the ESF or SF frame-pattern setting of
the FRMG option.
Upon reception of an RAI (yellow) from the CPE, the H2TU-R sends RAI-CI
toward the network if the network signal received at the H2TU-R is clear. If
the network signal is impaired (LOS, AIS, or Loss of Frame [LOF]), then the
RAI is automatically passed on to the network.
Accompanies the LOSW alarm and identifies the span where the LOSW
alarm occurred.
Accompanies the DBER, HBER, MAL, and LA alarm and indicates that the
alarm has occurred at the H2TU-C central office unit.
Accompanies the DBER, HBER, MAL, and LA alarm and indicates that the
alarm has occurred at the H2TU-R remote unit.
July 21, 2003
Front Panel
Continued
5