UpDown Desk PRO Series Set Up And Operation Manual page 32

If you make any errors or need to start the above instructions again, simply press the 'M3' button
twice.
F - 'Up' anti-collision sensitivity
If you feel your desk's upward anti-collision feature is being activated too soon or not soon enough,
you can adjust its sensitivity.
1. Press and hold the 'M4' button for approximately 10 seconds until you hear the 2
beep. Release your finger from the button. The letter 'A' will be displayed.
2. Use the 'Up' and 'Down' buttons to toggle through the menu until you reach 'F'
3. Press 'M4' once
4. Use the 'Up' and 'Down' buttons to scroll through 1-4. 1 being the most sensitive, 3 being
the least sensitive and 4 turns off the anti-collision.
5. Press 'M3' twice to exit
If you make any errors or need to start the above instructions again, simply press the 'M3' button
twice.
32
nd audible