UpDown Desk PRO Series Set Up And Operation Manual page 24

It is now time to finalise the position of the joined desktops assembly onto the frame. The frame
should still be loose/moveable underneath the desktop as no spreader bar screws have been
tightened and no self tapping desktop screws installed. You may need to wriggle the frame around
to achieve the results described below.
This step applies to both the main desktop and return desktop. Beginning with the large desktop (in
this case 180cm), finalise the overhang and squareness to the frame. We generally recommend
approximately 10cm of overhang for a desktop although 5cm either direction is acceptable.
The desktop should be evenly positioned with respect to the spreader bars.
24