Safety Measures - Vitek VT-1904 Instruction Manual

FAN VT-1904
The fan is intended for artificial ventilation of rooms.
DESCRIPTION
1. Base
2. Body
3. Air outlet grid
4. Carrying handle
5. Control panel
6. Air inlet grid
7. "ON/OFF" power/timer control switch
8. Air flow speed selection buttons «0-1-2-3»
9. Oscillation mode on/off button «OSC» («STOP» –
STOP, «MOVE» – MOVING)

SAFETY MEASURES

Before using the fan, read this instruction manual
carefully and keep it for further reference.
•
Use the unit for its intended purpose only, as it is
stated in this manual.
•
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/her
property.
•
Before switching the unit on for the first time make
sure that your home mains voltage corresponds to
the unit operating voltage.
•
Before using the fan examine the power cord closely
and make sure that it is not damaged. If you find that
the power cord is damaged, do not use the unit.
•
Do not use the fan outdoors.
•
Place the unit on a flat, dry and steady surface
away from sources of heat or open flame.
•
Do not use the unit near containers filled with
water, next to a kitchen sink, in wet basements or
near a swimming pool.
•
Do not immerse the fan, power cord and power
plug into water or any other liquids.
•
Do not touch the unit body and the power plug
with wet hands.
•
If the fan falls into water, unplug it before touching
it and only then you may take the fan out of water.
Apply to the nearest authorized service center
for testing or repairing the unit at the contact
addresses given in the warranty certificate and on
the website www.vitek.ru.
•
Make sure that the power cord does not contact
with hot surfaces and sharp furniture edges.
•
Do not switch the unassembled fan on.
•
Do not insert any foreign objects into the open-
ings of the fan protective grids to avoid injuries or
unit damage.
•
Do not touch the rotating blades during the fan
operation.
•
Do not place the fan near curtains or house plants.
•
It is not recommended to stay under the air flow
coming from the fan for a long time (especially for
children and elderly people).
•
Never leave the operating unit unattended.
•
Unplug the fan before cleaning and when you do
not use the unit or before moving it to a new place.
•
When unplugging the fan pull the plug but not
the cord.
•
Clean the unit regularly.
•
Do not leave children unattended to avoid them
using the unit as a toy.
•
For children safety do not leave polyethylene bags
used for packaging unattended.
Attention! Do not allow children to play with polyeth-
ylene bags or packaging film. Suffocation hazard!
•
Do not allow children to touch the unit body and
the power cord during the unit operation.
•
The unit is not intended to be used by people with
physical, sensory or mental disabilities (including
children) or by persons lacking experience or knowl-
edge if they are not under supervision of a person
who is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
•
Do not use the fan if the blades, the power cord
or the power plug are damaged, if the fan works
improperly, after it was dropped or was damaged
in some other way.
•
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service, or
similar qualified personnel to avoid danger.
•
Do not repair the unit by yourself. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it has fallen, unplug the unit and
contact any authorized service center at the con-
tact addresses given in the warranty certificate
and on the website www.vitek.ru.
•
Transport the unit in the original package.
•
Keep the unit in a cool dry place unreachable by
children or handicapped persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE IN
PRODUCTION AREAS AND WORK SPACES ARE
PROHIBITED.
BEFORE THE FIRST SWITCHING-ON
After unit transportation or storage at low tem-
perature keep it for at least three hours at room
temperature before switching on.
FAN ASSEMBLING
•
The fan is supplied disassembled. Do not con-
nect the unit to the mains, if it is not completely
assembled.
•
Unpack the unit and remove any stickers that can
prevent its operation.
•
Check the unit for damages, do not use it in case
of any.
•
Before using the unit for the first time, make sure
that the voltage in your mains corresponds to the
unit operating voltage.
•
Remove the fastening nut from the lower part of
the fan body (2) (pic. 1, 2).
3
ENGLISH