V-ZUG Combair V6000 Operating Instructions Manual page 54

8 Care and maintenance
▸ Put the door glass 5 back in. To do this, insert
the door glass 5 into the door frame and gently
push it back towards the hinges.
– The markings on the glass must be legible.
▸ Fit the seal 4.
Applies to all appliances:
▸ Put the door glass 3 back in. To do this, insert
the door glass 3 into the door frame and gently
push it back towards the hinges.
– The markings on the glass must be legible.
▸ Fit the seal 2.
▸ Insert the door glass 1 into the door frame and
gently push it back towards the hinges.
– The door glass 1 can only be put back if po-
sitioned correctly with the shiny surface on
the outside.
8.6 Cleaning the door seal
▸ Clean the door seal with a soft cloth dampened with water, but do not use any clean-
ing agent.
▸ Dry with a soft cloth.
The door seal in appliances with a pyrolysis function is impregnated with graphite,
which can transfer off onto the cloth when being cleaned.
54
4
5
2
3
1