V-ZUG Combair V6000 Operating Instructions Manual page 50

8 Care and maintenance
7.12 EcoManagement
Consumption information
Displays the average energy consumption of the last 25 operations, the total energy con-
sumption for the last month (or since a reset in the last month), the total energy con-
sumption for the last year (or since a reset in the last year) and the total energy con-
sumption.
Consumption indicator
If set to «On», the energy consumed is displayed when the application ends.
Resetting
Resets all EcoManagement counters except for total consumption.
7.13 Customer Services
This part of the menu is intended for service staff and is password-protected.
8 Care and maintenance
Risk of burns from hot surfaces!
Allow the appliance and the accessories to cool down before cleaning.
Incorrect handling can result in damage to the appliance!
Use soft cloths only. Do not use any abrasive, alkaline or highly acidic cleaning
agents, metal scrapers that are sharp or scratch, steel wool, scouring pads, etc. as
these products will damage the surfaces. Glass surfaces that are scratched can
crack.
Never use a steam cleaner to clean the appliance.
8.1 Cleaning the exterior
▸ Remove any soiling or residues of cleaning solution immediately.
▸ Clean the surfaces and display with a soft cloth dampened with water and a little
washing-up liquid.
▸ Dry with a soft cloth.
When cleaning the display, the
ments from being unintentionally activated.
8.2 Cleaning the cooking space
Incorrect handling can result in damage to the appliance!
Do not bend the temperature sensor or heating elements.
Do not scour the surface. Scouring will damage the surface.
▸ Remove any soiling from the cooking space while still hand warm. Use a soft cloth
dampened with water and a little washing-up liquid. Wipe dry with a soft cloth.
▸ Remove all traces of cleaning agent, otherwise the non-stick properties of the coating
could be affected.
In the case of stubborn soiling in appliances without pyrolysis:
▸ Use a commercially available oven cleaner and follow the manufacturer's instructions.
50
display lock can be used to protect the operating ele-