V-ZUG Combair V6000 Operating Instructions Manual page 52

8 Care and maintenance
Cancelling
▸ Touch «Stop» in the display.
– Pyrolytic self-cleaning is cancelled.
– The following appears in the display: «Residual heat in the appliance».
– The appliance door remains locked until the temperature drops below 300 °C.
End
The appliance door cannot be opened until the temperature has dropped below 300 °C.
▸ Wait until the appliance has cooled to hand warm to remove any residue left behind
using a soft cloth dampened with water. Do not use cleaning agents.
At the front of the cooking space is the door seal. It is susceptible to abrasion and
damage from scouring. The door seal therefore requires gentle cleaning.
8.5 Cleaning the appliance door
▸ Clean the appliance door with a soft cloth dampened with water and a little washing-
up liquid.
▸ Dry with a soft cloth.
Removing the appliance door
The appliance door is heavy. When removing and reinstalling the appliance door,
hold it at the sides firmly with both hands.
▸ Open the appliance door as far as it will go.
▸ Fold the clips 2 on both door hinges 1 forward.
▸ Close the appliance door as far as its airing
position (about 30°).
▸ Lift the appliance door out evenly and at an
angle.
52
2 1