V-ZUG Combair V6000 Operating Instructions Manual page 53

Reinstalling the appliance door
▸ Push the appliance door 3 evenly into both
hinges 1 as far as it will go.
▸ Open the appliance door as far as it will go
and fold back the clips 2.
– If the appliance door will not close properly,
check the clips 2.
– Do not force the appliance door closed.
Ensure that the appliance door is pushed in as far as it will go otherwise the appli-
ance could get damaged when it is closed.
Cleaning the door glass
▸ Lay the appliance door on a clean, flat surface
(covered e.g. with a tea towel) with the handle
facing down.
– Make sure the handle does not come into
contact with the surface.
▸ Lean against the appliance door.
▸ Carefully push the glass 1and raise it slightly
up and away from the hinges.
▸ Remove the seal 2.
▸ Gently push the door glass 3 and raise it
slightly up and away from the hinges.
Applies to pyrolytic appliances:
▸ Remove the seal 4.
▸ Gently push the door glass 5 and raise it
slightly up and away from the hinges.
▸ Clean the glass panels and dry well.
8 Care and maintenance
3
1
2
3
4
5
2 1
53