Start Web Management - Planet FSD-624SF Quick Installation Manual

Planet technology 4-port 100base-fx + 2 gigabit web smart switch quick installation guide

Hide thumbs Also See for FSD-624SF:

Quick Installation Guide for FSD-624SF

Start Web Management

The PLANET FSD-624SF provides a built-in browser interface. You can

manage the Switch remotely by having a remote host with Web browser,

such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.

The following shows how to startup the Web Management of the Switch,

please note the Switch is configured through an Ethernet connection,

make sure the manager PC must be set on the same IP subnet address,

for example, the default IP address of the Switch is 192.168.0.100 (the

factory-default IP address), then the manager PC should be set at

192.168.0.x (where x is a number between 1 and 254, except 100), and

the default subnet mask is 255.255.255.0.

Use Internet Explorer 5.0 or above Web browser, enter default IP address

http://192.168.0.100

To access the Web interface then the Web login screen appears in Figure 1

- 3 -

Table of Contents