Start Web Management - Planet WGSW-5242 Quick Installation Manual

48-port 10/100mbps + 4 gigabit tp / 2 sfp managed switch

6. Start Web Management

The following shows how to startup the Web Management of the WGSW Managed

Switch. Note the Managed Switch is configured through an Ethernet connection,

please make sure the manager PC must be set on the same IP subnet address.

For example, the default IP address of the WGSW Managed Switch is

192.168.0.100, then the manager PC should be set at 192.168.0.x (where

x is a number between 1 and 254, except 100), and the default subnet mask

is 255.255.255.0.

PC / Workstation

with

IE Browser

IP Address:

192.168.0.x

RJ-45/UTP-Cable

Figure 6-1: IP Management Diagram

WGSW Managed Switch

IP Address:

192.168.0.100

Table of Contents