While Ip Address Be Changed Or Forgotten Admin Password; Customer Support - Planet FSD-624SF Quick Installation Manual

Planet technology 4-port 100base-fx + 2 gigabit web smart switch quick installation guide

Hide thumbs Also See for FSD-624SF:

Quick Installation Guide for FSD-624SF

Now, you can use the Web management interface to continue the Switch

management, please refer to the user manual for more.

Notice:

For security reason, please change and memorize the new password after

this first setup.

While IP Address be changed or forgotten admin

To reset the IP address to the default IP Address "192.168.0.100" and

the username /password to factory default mode (default user name and

password is admin). Press the hardware reset button at the rear panel

about 5 seconds. After the device is rebooted, you can login the

management Web interface within the same subnet of 192.168.0.xx and

default username / password.

Hardware

Thank you for purchase PLANET products. You can browse our online

FAQ resource at the PLANET Website first to check if it could solve you

issue. If you need more support information, please contact PLANET

switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address :

support_switch@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

other trademarks belong to their respective owners.

2010-A33190-000

Reset

- 5 -

password –

All

Table of Contents