Advertisement
6. Start Web Management
The following shows how to startup the Web Management of the WGSW Managed
Switch. Note the Managed Switch is configured through an Ethernet connection,
please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the WGSW Managed Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254, except 100), and the default
subnet mask is 255.255.255.0.
PC / Workstation
with
IE Browser
IP Address:
192.168.0.x
n Login the Managed Switch
1. Use
Internet
Explorer
http://192.168.0.100 (the factory-default IP address or that you have just
changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default username
"admin" and password "admin" (or the password you have changed via
console). The login screen in Figure 6-2 appears.
Username: admin
Password: admin
WGSW Managed Switch
RJ-45 / UTP Cable
Figure 6-1 IP Management diagram
6.0
or
above
IP Address:
192.168.0.100
Web
browser,
enter
IP
address
Advertisement
