Start Web Management - Planet MGSD-10080F Quick Installation Manual

8-port 100/1000x sfp + 2-port 10/100/1000t management, metro ethernet switch

Hide thumbs Also See for MGSD-10080F:

7. Start Web Management

The following shows how to start up the Web Management of the Managed

Switch. Note the Managed Switch is configured through an Ethernet connection.

Please make sure the manager PC must be set on the same IP subnet address.

For example, the default IP address of the Managed Switch is 192.168.0.100,

then the manager PC should be set at 192.168.0.x (where x is a number between

1 and 254, except 100), and the default subnet mask is 255.255.255.0.

PC / Workstation

with

Terminal emulation software

IP Address :

192.168.0.x

1. Use Internet Explorer 7.0 or above Web browser. Enter IP address

http://192.168.0.100 (the factory-default IP address or that you have just

changed in console) to access the Web interface.

RJ-45 / UTP Cable

Figure 7-1: IP Management Diagram

PLANET Metro Managed Switch

Table of Contents

Show Quick Links