Start Web Management; Login The Managed Switch - Planet SGSD-1022 Quick Installation Manual

6. Start Web Management

The following shows how to start up the Web Management of the SGSD / SGSW
Managed Switch. Note the SGSD / SGSW Managed Switch is configured through an
Ethernet connection, please make sure the manager PC must be set on the same
IP subnet address.
For example, the default IP address of the SGSD / SGSW Managed Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with
IE Browser
IP Address:
192.168.0.x

Login the Managed Switch

1. Use Internet Explorer
http://192.168.0.100 (the factory-default IP address or that you have just
changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name
"admin" and password "admin" (or the username/password you have changed
via console). The login screen in Figure 6-2 appears.
Default User name: admin
Default Password: admin
RJ-45 / UTP Cable
Figure 6-1 IP Management diagram
6.0 or above
PLANET Managed Switch
IP Address:
192.168.0.100
Web browser, enter IP address