Table of Contents
Advertisement
Step 2. Click Logout the Content Security Gateway.
Step 3. Click OK to logout or click Cancel to discard the change.
4.2 Interface
In this section, the Administrator can set up the IP addresses for the office network. The Administrator may
configure the IP addresses of the LAN network, the WAN network, and the DMZ network. The netmask and
gateway IP addresses are also configured in this section.
4.2.1 LAN
Entering the Interface menu:
Click on Interface in the left menu bar. Then click on LAN below it. The current settings of the interface
addresses will appear on the screen.
Configuring the Interface Settings
Using the LAN Interface, the Administrator sets up the LAN network. The LAN network will use a private IP
scheme. The private IP network will not be routable on the Internet.
Content Security Gateway User's Manual
- 37 -
Advertisement
Table of Contents
