Table of Contents
Advertisement
Log Mail Configuration: When the Log Mail files accumulated up to 300Kbytes, router will notify
administrator by email with the traffic log and event log.
NOTE: Before enabling this function, you have to configure E-mail Settings in System -> Settings.
Syslog Settings: If you enable this function, system will transmit the Traffic Log and the Event Log
simultaneously to the server which supports Syslog function.
NOTE: To restart Connection Log, click the Refresh button on the right hand side in Log window.
Enable Log Mail Support & Syslog Message
Log Mail Configuration /Enable Log Mail Support
Step 1. Firstly, go to Admin –Select Enable E-mail Alert Notification under E-Mail Settings. Enter the
e-mail address to receive the alarm notification. Click OK.
Step 2. Go to LOG
System Settings/Enable Syslog Message
Step 1. Check to enable Syslog Message. Enter the Host IP Address and Host Port number to receive
the Syslog message.
Step 2. Click OK.
Disable Log Mail Support & Syslog Message
Step 1. Go to LOG
Step 2. Go to LOG
4.8.2 Accounting Report
Accounting Report can be divided into three parts, Setting, Outbound and Inbound.
Log Backup. Check to enable Log Mail Support. Click OK.
Log Backup. Uncheck to disable Log Mail Support. Click OK.
Log Backup. Uncheck to disable Settings Message. Click OK.
Content Security Gateway User's Manual
- 198 -
Advertisement
Table of Contents
