Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB745 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets, lockbolts and MAGNA-GRIP®
fasteners. It weighs just over 7.2 lbs. (3.26 kg) and can be operated in any position. It has a .620" (15.75 mm) fastener setting stroke and a rated
pull load of 6,300 lbs. (28.02 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB745 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2bar) providing maximum efficiency.
At 90 psi. (6.2bar) of air pressure, the GB745 does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread for accepting the user's air hose fitting.
Nose Assemblies that were designed for the model 353 installation tool mount directly on the GB745 without the use of an adapter.
Nose Assemblies that were designed for the model 352 installation tool will attach to the GB745 with the use of the adapter assembly (745751).
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY (SEE NOSE ASSEMBLY SELECTION
CHART ON PAGE 19).
WARNING:
Do not operate in an explosive atmosphere.
The GB745 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB745 INSTALLATION TOOL S/N: 3569 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 7.20 lbs. (3.26 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar) Max.
Air consumption
- .30 SCF/cycle (8.50 L/cycle)
Hydraulic Oil
- Automatic Transmission Oil,
Setting stroke
- .620" (15.75 mm)
Rated pull load
- 6,300 lbs. (28.02 kN)
Noise level
- 80 dB(A)
Vibration
- Tested – No hazards found.
Dexron® III, or equivalent.
4
Rev. 6/22
Advertisement
Table of Contents
