Table of Contents
Advertisement
Quick Links
ORIGINAL INSTRUCTIONS
S/N: 1001 AND ABOVE
PLEASE CONTACT GAGE BILT FOR
ALL OTHER SERIAL NUMBERS.
GB745SHV/LB8
INSTALLATION TOOL
GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE
E-MAIL US FOR A DISTRIBUTOR NEAR YOU.
44766 Centre Court, Clinton Twp., MI. 48038 USA
GAGE BILT
Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505
solutions@gagebilt.com / www.gagebilt.com
MADE in USA
Advertisement
Table of Contents
Related Manuals for Gage Bilt GB745SHV/LB8
Summary of Contents for Gage Bilt GB745SHV/LB8
- Page 1 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GB745SHV/LB8 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. 44766 Centre Court, Clinton Twp., MI. 48038 USA GAGE BILT Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 solutions@gagebilt.com / www.gagebilt.com...
-
Page 2: Table Of Contents
Bleeding ....................................12 Troubleshooting / How to Clean Vacuum Regulator ......................13 Overhaul ....................................14-16 Parts Lists .................................... 17-19 DEXRON® III Oil Safety Data (SDS) ............................20 Accessories ..................................21-24 GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 3: Eu Conformity And Warranty
1 year after the receipt of the material by the customer. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 4: Description And Technical Specifications
.620” (15.75 mm) fastener setting stroke. The GB745SHV/LB8 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB745SHV/LB8 does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle). -
Page 5: Description Of Functions
Actuator Lever Assembly Hydraulic “PULL” Hose Air Line Bleed Screw Handle Assembly Air Flow Air Line Control Valve Air Inlet Tee Deflector Vacuum Assembly Image may not reflect actual tool GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 6: Warnings
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 7: Principle Of Operation
Piston Rod Assembly Air Piston moves down moves up Air Piston moves down Air exhaust Air exhaust Pressurized Oil Unpressurized Oil Pressurized Air Unpressurized Air Images may not reflect actual tool GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 8: How To Set-Up The Gb745Shv5/Lb10
HOW TO SET-UP THE GB745SHV/LB8 WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 9: How To Use The Gb745Shv5/Lb10
HOW TO USE THE GB745SHV/LB8 WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 10: Maintenance And Hydraulic Thread Preparation
WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided. -
Page 11: Filling
(745366). Bleeder Top of Handle Assembly hole #2 *located on far side* Oil passage with o’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 12: Bleeding
Subtract dimension (A) from dimension (B). If stroke is not consistent within 1/64" (.396 mm) repeat bleeding steps 2-15 until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke. -
Page 13: Troubleshooting / How To Clean Vacuum Regulator
Note: The vacuum regulator may visually appear clean, but still may be contaminated with a thin film, therefore, the steps above should be performed to assure best performance. 4) S.H.C.S. Fitting Image may not reflect actual tool. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... -
Page 14: Overhaul
Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings. - Page 15 * Apply Vibra-tite® part # 405125 to all threads and allow it to set 20 minutes prior to assembly. * See overhaul pg. 17 for more information. Images may not reflect actual tool. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE...
- Page 16 Valve spring installation tool (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE...
-
Page 17: Parts Lists
PARTS LIST GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE... - Page 18 This tool incorporates a patented hydraulic relief valve. When overhauling tool, o’ring (A-287), back-up ring (401101), retaining ring (400936) and spring (50806) must be replaced. Failure to do so could result in SEVERE PERSONAL INJURY! GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE...
- Page 19 PARTS LIST GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE...
-
Page 20: Dexron® Iii Oil Safety Data (Sds)
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB745SHV/LB8 INSTALLATION TOOL REV. 5/22... -
Page 21: Accessories
GB745SHV-LB8 ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Grip Gage #269G3 Grip Gage #GB105093 For CHERRYMAX® and CHERRYLOCK® fasteners For NAS LOCKBOLTS and blind fasteners (Sold Separately) (Sold Separately) Gage Bilt also supplies pin &... - Page 22 Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Adapter Assembly Adapter Assembly Adapter Assembly #745751 #353204 #353205 Adapts all offset 713 and 752 series noses Adapts all offset 204 series noses...
- Page 23 This page intentionally left blank GB745SHV/LB8 INSTALLATION TOOL REV. 5/22 SERIAL # 1001 AND ABOVE...
- Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Contact us for more information. Approved Approved Split Handle Installation Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) MAGNA-GRIP®...
Need help?
Do you have a question about the GB745SHV/LB8 and is the answer not in the manual?
Questions and answers