Table of Contents
Advertisement
Technical Specifications
The following specifications are important and vital to the correct operation of this product. Failure to adhere to
the specifications will result in any warranty or guarantee that was provided becoming null and void.
Ordering Information
PRT-ISO16-DIN
Power Supply
DC Input Voltage
DC Output Voltage (DC IN
Pass-Through)
Operating Current
Low Voltage Cutout
Low Voltage Restore
Communication
RS-485
Inputs
Operating Voltage
Input Type
Input Current Draw
Outputs
Outputs
Dimensions
Dimensions (L x W x H)
Net Weight
Gross Weight
Operating Conditions
Operating Temperature
Storage Temperature
Humidity
Mean Time Between Failures
(MTBF)
It is important that the unit is installed in a dry cool location that is not affected by humidity. Do not locate the unit
in air conditioning or a boiler room that can exceed the temperature or humidity specifications.
Integrated Control Technology continually strives to increase the performance of its products. As a result these
specifications may change without notice. We recommend consulting our website (www.ict.co) for the latest
documentation and product information.
PRT-ISO16-DIN | Protege DIN Rail 16 Input Opto-Isolated Expander | Installation Manual
Protege DIN Rail 16 Input Opto-Isolated Expander
11-14V DC
10.45-13.85VDC 0.7A (Typical) Electronic Shutdown at 1.1A
80mA (Typical)
8.7VDC
10.5VDC
Isolated Module Network
10V to 250V (DC/AC RMS) 35-75Hz
16 Galvanic Isolated (10ms to 1hr Input Speed Programmable)
Current 3mA per input @ 220VDC
4 (50mA Max) Open Collector
156.8 x 90 x 60mm (6.17 x 3.54 x 2.36")
289g (10.2oz)
390g (13.8oz)
-10° to 55°C (14° to 131°F)
-10˚ to 85˚C (14˚ to 185˚F)
0%-93% non-condensing, indoor use only (relative humidity)
784,316 hours (calculated using RFD 2000 (UTE C 80-810) Standard)
18
Advertisement
Table of Contents
