Instrument Operation; Display Organization; Terminal Voltage Monitor; Battery Indication - METREL EurotestIM Instruction Manual

MI 3110 EurotestIM

4 Instrument operation

4.1 Display organization

Figure 4.1: Typical function
display

4.1.1 Terminal voltage monitor

The terminal voltage monitor displays on-line the voltages on the test terminals and
information about active test terminals in the a.c. installation measuring mode.
Online voltages are displayed together with test terminal indication. All
three test terminals are used for selected measurement.
Online voltages are displayed together with test terminal indication. L1
and L2 test terminals are used for selected measurement.

4.1.2 Battery indication

The battery indication indicates the charge condition of battery and connection of
external charger.

4.1.3 Messages

In the message field warnings and messages are displayed.
Measurement is running, consider displayed warnings.
Conditions on the input terminals allow starting the measurement;
consider other displayed warnings and messages.
Conditions on the input terminals do not allow starting the
measurement, consider displayed warnings and messages.
Battery capacity indication.
Low battery.
Battery is too weak to guarantee correct result. Replace or
recharge the battery cells.
Charging in progress (if power supply adapter is connected).
16
Instrument operation
Function name
Result field
Test parameter field
Message field
Terminal voltage monitor
Battery indication