When entering the function, the currently set DWC
level or status is indicated on the left. Customisation
options are indicated in the middle: levels 1 to 8 and
status OFF.
Use buttons (1) and (2) to select the new desired
intervention level or the "OFF" indication and press
button (4) to confirm and highlight MEMORY.
If you do not want to memorise the selected level,
press button (1) or (2) once to pass to the previous or
next box, thus removing the amber highlighting
from the "MEMORY" box.
To memorise the new selection keep button (4)
pressed for two seconds with the "MEMORY"
indication highlighted in orange that will change to
"MEMORIZED" and become green.
If storage is successful, the "MEMORY" box returns
to its initial status (not highlighted and with
MEMORY indication), the set level or status will be
refreshed and then EXIT will be highlighted in green.
To exit the menu and go back to previous page,
select "EXIT" and press button (4). The instrument
panel will go back to the previous menu level and it
will be possible to start the "Parameter storage"
procedure.
210
If the DTC is disabled (set to OFF), the DWC
parameter cannot be changed and is forced to level
OFF and therefore the relevant setting menu is not
available.