Ducati MONSTER 1200 Owner's Manual page 128

Selecting the Riding Mode
Press CONFIRM MENU button (4) to enter the menu
for selecting the Riding Mode (A). The instrument
panel displays the speed indication (on the RH side)
and displays riding mode name (on the LH side):
SPORT
●
TOURING
●
URBAN
●
One of them will be marked to indicate the last
memorised condition that is currently active.
Attention
It is not possible to open the menu for selecting
the riding mode, if button (4) is in the position for
activating the turn indicators (to the left or right)
For the marked Riding Mode, instrument panel
displays information concerning some of the
associated parameters:
ABS system: ABS lettering followed by the set
●
calibration level (1, 2, 3) in case ABS is active or
followed by OFF in case ABS is disabled.
DTC system: DTC lettering followed by the set
●
level (1, 2, 3, 4, 5, 6, 7, 8) in case DTC is active or
followed by OFF in case DTC is disabled;
DWC system: DWC lettering followed by the set
●
level (1, 2, 3, 4, 5, 6, 7, 8) in case DTC is active or
followed by OFF in case DWC is disabled;
engine power (ENGINE): ENG lettering followed
●
by set engine power: HIGH, MED or LOW.
if the DQS is present: the DQS indication
●
followed by the set calibration level ("UP",
"DOWN", "UP/DOWN" or "OFF").
Displayed information includes the values stored for
each single Riding Mode. The stored settings may be
the factory ones (Ducati default settings) or the ones
customised by the owner. Any time the CONFIRM
MENU button (4) is pressed, the riding mode is
highlighted and the associated parameters are
displayed (A).
Once the desired riding mode is highlighted, confirm
the selection by holding down the CONFIRM MENU
button (4) for 2 seconds: the new riding mode
selection is saved and the standard screen is
displayed (B).
Once the desired riding mode is highlighted, if the
CONFIRM MENU button (4) is not pressed within 5
seconds, the new riding mode selection is not stored
and the standard screen is displayed (C).
127