Advertisement
Table of Contents
29-CTVX05 - Vauxhall Can-Bus Steering Wheel Control Interface
Hold - HangUp
Press - PickUp
Source
Steering Wheel Control Functions
Setting the Clock (Vehicles with and without Clock setting buttons)
1. To enter clock setting mode, press and hold the 'AUDIO SOURCE' button
on the steering wheel until the time displayed on the dash shows '00:00'
2. After one second, the display will return back to normal. T his indicates
Volume+
you are now in clock setting mode.
Press - Mute
3. Use Vol + and Vol
Hold - Hangup
Vol + changes hours and Vol
Volume -
4. Once the time has been set, if neither button is pushed within five seconds
the display with show 00:00 for one second to indicate clock setting mode has
been left.
-
on the steering wheel to adjust the time.
-
changes minutes.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Connects2 29-CTVX05
Summary of Contents for Connects2 29-CTVX05
- Page 1 29-CTVX05 - Vauxhall Can-Bus Steering Wheel Control Interface Steering Wheel Control Functions Setting the Clock (Vehicles with and without Clock setting buttons) Hold - HangUp Press - PickUp Source 1. To enter clock setting mode, press and hold the 'AUDIO SOURCE' button on the steering wheel until the time displayed on the dash shows '00:00' 2.
- Page 2 Installation Guide Cr;\_® CONNECTS CTSVXQ05.2 Part No: Vauxhall Can-Bus Steering Wheel Control Interface Setting the Clock (Vehicles with and without Clock setting buttons) 1. To enter clock setting mode, press and hold the 'AUDIO SOURCE' button on the steering wheel until the time displayed on the dash shows '00:00' 2.
Need help?
Do you have a question about the 29-CTVX05 and is the answer not in the manual?
Questions and answers